SPECIFICATIONS:
PPHP1299AI PPHP1591 PPHP1594A PPHP1599AI
Electrical safety
All products are fitted with a detachable power cord (supplied) which connects to the AC mains and the back panel of the
loudspeaker. The power cord has an IEC female connector on one end and male mains connectors on the other end. This
cord is supplied specially to accommodate the different worldwide safety and electrical code requirements. The power
cord supplied with your product has a 3-pin type plug. Do not cut off or damage the grounding plug. Like any electrical
appliance, your EON powered speakers should not be used in water or when wet.
Product design and specifications are subject
to change without previous notice.
PPHP803MU PPHP103MU PPHP123MU PPHP153MU
Woofer
Impedance 4ohms 4ohms 4ohms 4ohms
Sensitivity 93dB/m/w 94dB/m/w 95dB/m/w 97dB/m/w
Freq.Resp 40Hz-20KHz 40Hz-20KHz 30Hz-22KHz 30Hz-22KHz
Diameter 8" 10" 12" 15"
Coil Diameter 1.5" 2" 2.5" 3"
Magnet 30oz 40oz 50oz 60oz
Tweeter
Impedance 8ohms 8ohms 8ohms 8ohms
Sensitivity 100dB/m/w 100dB/m/w 100dB/m/w 100dB/m/w
Freq.Resp 800Hz-20KHz 800Hz-20KHz 800Hz-20KHz 800Hz-20KHz
Coil Diameter 1" 1" 1.34" 1.75"
Magnet 12oz 12oz 13.5oz 23oz
Built-in Amplifier Yes Yes Yes Yes
To Next Page
Loading...
