Need help?Do you have a question about the Pyle PT888BTWM and is the answer not in the manual?
General| Brand | Pyle |
|---|---|
| Model | PT888BTWM |
| Category | Home Theater System |
| Bluetooth | Yes |
| Number of Channels | 5.1 |
| Subwoofer | Yes |
| Remote Control | Yes |
| Frequency Response | 20Hz - 20kHz |
| T.H.D. | < 1% |
| Radio Support | FM |
| FM Frequency Range | 87.5 - 108 MHz |
| USB Port | Yes |
| Inputs | RCA, USB |
| PMPO | 3000 Watts |
| Impedance | 4 Ohm |
| Speaker Configuration | 5.1 |
| Power Output | 3000 Watt |
| RMS Power | 1500 Watts |
Controls the power ON/OFF state of the unit.
Shows the function displayed on the fluorescent window.
Infrared receiver for signal reception from the remote.
Adjusts volume and selects functions like Multi or MIC.
Port for connecting USB flash drives for media playback.
Selects digital input sources like HDMI, coaxial, optical.
Selects analog input sources such as DVD/CD, AUX, USB, BT.
Controls USB/BT playback and AM/FM station scanning/selection.
Enables or disables the HDMI ARC function for audio return.
Selects output modes like 2.1 channel or 5.1 channel.
Accesses music menu for treble, bass, balance, display, DSP settings.
Accesses microphone menu for volume, treble, bass, echo, delay.
Connects KARAOKE microphones to the unit.
Step-by-step guide on how to replace preset radio stations using the remote control.
Connects to the AM/FM antenna for radio reception.
Connects audio outputs from DVD/CD and AUX sources.
Connects surround, center, subwoofer, and master speakers.
Connects the unit to AC power outlet for operation.
Connects coaxial and optical digital audio sources.
Connects HDMI sources and output to TV, supporting ARC.
For receiving wireless Bluetooth signals.
Button to switch between 110V and 220V power input.
Buttons for standby power and muting audio output.
Buttons to select various input sources like HDMI, USB, BT, DVD, AUX.
Buttons for tuning AM/FM stations and selecting USB/BT programs.
Adjusts master volume, balance, treble, bass, and channel volumes.
Selects speaker channel modes and DSP sound effects.
Adjusts microphone volume, treble, bass, echo, and delay.
Buttons for scanning stations and storing presets.
Guidelines for placing and connecting the product safely before use.
How to select different input channels (digital and analog).
How to set the speaker channel mode (2.1 or 5.1).
Instructions for adjusting total and individual channel volumes.
Detailed steps for adjusting specific channel volumes like center and surround.
How to use the USB port for playing music files.
Instructions for connecting and adjusting microphones.
How to activate HIFI mode for 2.0ch stereo audio output.
Connecting and using HDMI sources, including ARC function.
Using ARC to play TV audio through the receiver.
How to operate the FM radio tuner and save stations.
Selecting different sound field effects for audio playback.
Activating the loudness feature to enhance low frequencies.
Adjusting the display mode of the unit.
Restoring the unit to factory default settings.
To Next Page
