Pyle PTA1000 User Manual

www.PyleUSA.com 6 7 www.PyleUSA.com
Instruction
Pyle's PTA1000 Wireless BT Pro Audio Power Amplier is the perfect solution
for all of your audio needs. Using the latest sound amplication technology and
an impressive 1000 Wall power output, this receiver is designed to deliver pure
stereo sounds from a wide range of connected music sources. Built-in Wireless
BT audio receiver ability allows you to stream your music wirelessly and it works
with all of your favorite devices (like Smartphones, Tablets, laptops, Computers,
etc.) Enjoy full range stereo sound reproduction when streaming audio with a
wireless range of up to 30' feet. Additional system features include USB Flash
Drive Reader, SD Card Reader, Push Type Speaker Terminal connectors, RCA
Stereo Inputs, RCA Subwoofer Output, and along with an Aux (3.5mm) jack to
connect even more external devices. Take control of your sound with the Pyle
PTA1000 Wireless BT Pro Audio Power Amplier.
Wireless BT Operation Instruction:
External devices which have a built-in Wireless BT feature can be connected
to this amplier wirelessly to play through the amplier's speakers.
1. At rst be sure that the amplie is powered ON, and turn the volume to the
MINI position and it's better to pull the Wireless BT Antenna on at the back
panel for better receiving.
2. Press the BT/line button switch in on the front panel, you will hear the voice
"POWER ON" and also "PAIRING", and then the unit is automatically ready to
pair with your external device.
3. Turn ON the Wireless BT of your external devices like Smartphone, Computer,
and others, etc.
4. Search for available Wireless BT devices within range of your external device
and wait for your device to select "PYLE PRO" on the pairing devices lists.
5. And seconds later when you heard a voice "Your Device is Connected", then
the Wireless BT pairing is successful.
6. You can now play music on your external device through the amplier.
Help & Troubleshooting
If you experience any of the following diculties while using the unit, use this
troubleshooting guide to help you remedy the problem, should any problem
persist, consult your nearest dealer.
Problem
Possible Cause & Solution
No Power
"Ensure the power cord is securely connected.
*Plug a
dierent
device into the electrical outlet
to
verify that the outlet is working correctly
No
Sound
*The wrong input was
selected
on the amplier
*Music master volume control is set to minimum
• Fuse defective
*Speakers and speaker cables are either not
connected, loose or
malfunctioning.
Microphone
No
Sound
*The microphone is not turned on
*The
microphone
cable is either loose or not
functioning
*The
microphone volume for that channel is set to
minimum
*The
microphone is not
functioning
correctly
Severe Hum or Noise
*Ensure all cables and wires are
securely
connected
*Connect
a dierent source device to see if the
buzzing persists. If does not, the
problem may
be
with the
original device.
• Connect your
device
to a
dierent
input to the
amplier
• The volume is set too high and the
loudspeakers
distort

Pyle PTA1000 Specifications

General

Amplifier class	-
Frequency range	20 - 20000 Hz
Audio output channels	- channels
Peak power per channel	1000 W
Signal-to-Noise Ratio (SNR)	102 dB
Total Harmonic Distortion (THD)	1 %
Purpose	Home
Product color	Black
Connectivity technology	Wired
AC input voltage	110-220 V
Manual	Yes