EasyManua.ls Logo

Pyle PTA1000BT - Page 5

Pyle PTA1000BT
5 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
www.PyleUSA.com
8 9
www.PyleUSA.com
Problem
No
Power
"Ensure
the power cord is
securely connected.
*Plug a
dierent
device into the
electrical
outlet
to
verify that the
outlet
is
working
correctly
No
Sound
*The wrong input was
selected
on the
amplier
*Music master volume control is set to
minimum
Fuse
defective
*Speakers
and
speaker
cables are either
not
connected,
loose or
malfunctioning.
Microphone
No
Sound
*The
microphone
is not turned
on
*The
microphone
cable is either loose or
not
functioning
*The
microphone
volume for that
channel
is
set
to
minimum
*The
microphone
is not
functioning
correctly
Severe Hum or
Noise
*Ensure all cables and wires are
securely
connected
*Connect
a
dierent
source device to see if
the
buzzing persists.
If does not, the
problem may
be
with the
original device.
Connect
your
device
to a
dierent
input to
the
amplier
The volume is set too high and the
loudspeakers
distort
Help & Troubleshooting
If you experience any of the following diculties while using the unit, use this
troubleshooting guide to help you remedy the problem, should any problem
persist, consult your nearest dealer.
Features:
• 2-Channel Pro Audio Amplier
• Bridge able Amp: Bridge Mode Ability
• Built-in Wireless BT Streaming
• (2) 1/4" TRS Input Connector Jacks
• (2) XLR Input Connector Jacks
• (3) SpeakOn Output Connectors (AlB/Bridged)
• (2) Pair Speaker Terminal Binding Post Connectors
• Power, Protect, Clip, Signal LED Indicators
• Left and Right Channel Level Signal Indicators
• Built-in Ventilation Cooling Fans
• Front Panel Control Center
• Rack-Mountable System
Wireless BT Connectivity:
• Simple & Hassle-Free Pairing
• Instant Wireless Audio Streaming Ability
Works with All of Today's Latest Wireless BT Devices
Wireless BT Network Name: 'PYLE PRO'
Wireless BT Version: 5.0
Wireless Range: Up to 30'+ ft.
What's in the Box:
• Pro Audio Amplier • Power Cable • BT and FM Antenna
Technical Specs:
• Power Output: 2000 Watt MAX
• Amplier Type: 2-Channel
• 2x 1000 Watt @ 4 0hm
• 2x 500 Watt @ 8 0hm
• Distortion: <1.0%
• Input Level: + 4dB
• Signal/Noise Ratio: 102dB
• Frequency Response: 20Hz - 20kHz, +/- 0.2dB
• Power Supply: 120/220V, Switchable
• Dimensions (L x W x H): 19.09" x 9.84" x 3.54" -inches
This products can expose you to a chemical or group of chemicals, which
may include ”Lead (Pb)” which is known in the state of California to cause
cancer, birth defects, or other reproductive harm. For more info, go to
https://www.p65warnings.ca.gov/.

Related product manuals