FOLDER BROWSING:
Your USB device may contain a directory of multiple folders.
Press and HOLD “
” or “ ” button for three seconds to revert to the folder browsing / directory state.
The LED display will show the current directory (or folder) of your audio files. For example,
for the
second directory. (This option is only available for the CD disc and USB modes ).
Press “
” or “ ” again to browse between the directory / folders.
REPEAT MODES:
1. When playing disc, press “REPEAT” button twice, the repeat indication will blink
(that denotes a single song will repeat playing.)
2. When playing disc, press “REPEAT” button three times, the repeat indication will blink
(this denotes all songs will repeat playing.)
3. When playing disc, press “REPEAT” button four times, to exit from all REPEAT MODES and
the system turns back to normal playing state.
PROGRAM PLAYER MODE:
When in the stopped mode (with no audio playing), press the “PROG .” , the led will display
.
Press “ ” or “ ” to choose the song which you like, press the “PROG .” to confirm.
Press“ ” or “ ” to choose the song which you like, press the “PROG .” to confirm, as the next
song desired in the PROGRAM MODE (you can repeat the program at random. A CD can be
programmed for up to 20 songs.)
Press the “PLAY” button to start playing.
For example, press the button “PROG” once when under the stop state, the digital LED displays
, press “ ” to choose the second song → press “PROG” once more, led displays ;
press “
” to choose the no.5 song, and press the button “PROG” again to confirm. then
press the “play” button, it would start to play the no.2 and no.5 song which programmed just
moment.
Note: The program cannot be entered while music is playing. After entering into PROGRAM MODE,
if you press the STOP button before pressing the PLAY/PAUSE button, all of the programmed
songs will be cleared, that indicates the system failed to program. When finishing the programmed
playing, make sure to remember to press the STOP button twice to cancel the program
function, or else some of the functions will not be successful or will not play normally.
COPY FUNCTION
The copy function is capable of copying a whole playlist on a CD disc to your USB flash drive.. The
copy function will stop once your press the stop “ " button.
For the copy function to work successfully, make sure there should be enough space on your USB
drive for copying the desired amount of audio files.
*Please note - not all file types are compatible with the COPY FUNCTION.
PyleAudio.com
To Next Page
Loading...
