www.PyleUSA.com
16 17
www.PyleUSA.com
LISTEN TO RADIO, LINE INPUT OPERATION ADVANCED PLAYBACK
Mp3, AUX EXTERNAL CONNECTION OF AUDIO SIGNAL INPUT
Press lNPUT key on the remote control or on the machine panel, then you can
input MP3/AUX and AM/FM audio signal external connection, the display
shows the status. Audio signal of any equipment can be connected.
INPUT TRANSFER TO MP3, AUX
Press lNPUT key on the remote control or on the machine panel, then you can
input MP3/AUX and AM/FM audio signal external connection, the display
shows the status. Audio signal of any equipment can be connected.
LISTEN TO RADIO: FM/AM
Press INPUT key can transfer to the reception of a radio, then
press (FM/AM) key on the machine or on the remote control,
the machine will turn into FM/AM mode, and the display
shows the frequency and the channel number of the current
radio station.
Previous and Next
While playing, press PREV key to go back to start of this chapter, each press of
this key will skip a chapter. Each press of NEXT key while playing will skip the
current chapter and play the next one.
Fast Forward and Fast Reverse
1. Press FWD to fast forward through the disc. Each time the FWD button is
pressed, the fast forward motion speed changes.
2. Press ENTER/PLAY to resume normal playback.
3. Press REV to fast reverse through the disc. Each time the "REV" button is
pressed, the fast reverse motion speed changes.
4. Press ENTER/PLAY to resume normal playback.
Stop Playback
1. Press STOP button to go to stop mode, the TV screen will show the start logo.
As some disc the unit can recall the location where stopped, such as DVDs
and audio CDs.
2. Press P L AY to playback or to resume playback from the location where
playback is stopped or from the beginning of the disc.
3. Press STOP twice to stop completely.
Standby
Press STANDBY key on remote control to switch player to standby mode or
power on.
NOTES:
1. "INVALID KEY" may appear on the TV screen during operation.
A "INVALID KEY" means that the operation is not permitted by the unit or
the disc.
2. This unit controlled by CPU, under setting mode, there may be screen save ,
press any key to activate the unit. If you can’t use this function, you can set
SCREEN SAVER to OFF in SYSTEM SETUP PAGE of SYSTEM SETUP.
MANUAL SCAN
Press [FRE-] or [FRE+] key on the machine panel or on the
remote control to carry out manual scan to search for your
need.
AUTO SCAN
Press AUTO key on the machine panel or on the remote
control, then the machine itself will scan within the frequency
range once complete automatically.
FREQUENCY SELECTION SCAN
Press [TIME] key on the remote control, the display shows the
status. Then you can input the frequency of the radio station
you want to listen to.
A. FM frequency range: 87.5-1 08.0MHz
B. AM frequency range: 530-1620KHz
CHANNEL SELECT
Press [CH-] and [CH+] key on the remote control or on the
panel, then you can select the channel you have already
stored.
NOTES: You could store your favorite radio stations in continuous channels.