EasyManuals Logo

Pyle PWMAB250BK User Manual

Pyle PWMAB250BK
4 pages
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
5
6
You can connect your Bluetooth phone or other devices to the PA
speaker.
1. Turn on the unit.
2. Press the INPUT button which located on top control panel, near
the USB/SD slot.
3. The Bluetooth is active when you hear two “tone” indicator sound.
4. Use your Bluetooth phone or other devices to search for the PA speaker.
It will be displayed as PWMAB250.
5. Connect your device by selecting PWMAB250, it will require a four
digit code, the code is 0000.
6. Enter the code and connect with unit.
7. Play music on your phone or device, sound will come from the
speaker through the BLUETOOTH wireless connection.
8. You can use the VOLUME/BASS/TREBLE to adjust the sound level for
BLUETOOTH, also you can adjust the Bluetooth music sound through
your own phone or other device.
NOTES: If there is no sound through the PA speaker during Bluetooth,
Check the volume controller both on the unit and on your phone or
other device.
Using the Radio
1. Turn on the unit.
2. Press INPUT once, to select FM Radio.
3. Press PRE/NEXT to select your desired radio station.
Ensure that you have the extended the antenna located on the rear
of the speaker. It will ensure the best possible radio quality and
signal strength.
4. When you first use the radio, press NEXT button twice, it will
auto search and store the radio stations with the strongest signal.
BLUETOOTH playback
Use of the External Battery Option
To use the PA speaker longer than the internal battery life, you
can connect the PA speaker to a external 12V Battery Source.
1. Find the INPUT DC 12V on the top control panel.
2. Use the correct cable connect the INPUT DC 12V.
NOTES: The PA speaker will consume the internal battery first,
when it is low, the LOW BATTERY indicator light located on
the control panel will turn on, you can use the external 12V
battery to power on the unit. The external 12V battery will
also charge the internal battery while in use.
Instructions
PyleAudio
1600 63rd St
Brooklyn, NY
11204
www.pyleaudio.com

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Pyle PWMAB250BK and is the answer not in the manual?

Pyle PWMAB250BK Specifications

General IconGeneral
Product colorBlack
Volume controlRotary
Housing material-
Recommended usageSpeaker set unit
Suitable for outdoor useYes
Speaker placementFloor
Audio output channels1.0 channels
Woofer diameter (imperial)6.5 \
Tweeter diameter (imperial)1 \
Impedance4 Ω
Frequency range20 - 20000 Hz
RMS rated power150 W
Peak Music Power Output (PMPO)300 W
Battery life3 h
Bluetooth range19.8 m
USB 2.0 ports quantity1
Connectivity technologyWired & Wireless
AC input voltage110 - 220 V
Weight and Dimensions IconWeight and Dimensions
Weight4445 g

Related product manuals