5
6. A few seconds later your Bluetooth connection is success. And you can hear a voice.
ENJOY MUSIC FROM AN EXTERNAL DEVICE
1. After get your external device paired, press the button, then the music will play.
NOTE: It will not play automatically without pressing the button.
2. Press and hold the VOL- button to reduce the volume;
3. Press and hold the VOL+ button to increase the volume;
4. Just press the VOL- button to skip the start of the current song and press the VOL-
button again to skip the start of the previous song;
5. Just press the VOL+ button to skip the start of the current song and press the VOL+
button again to skip the next song;
6. Press the button to pause
7. Press the button again to restart to play.
AUX OPERATION
An external (auxiliary) audio source (i.e., personal CD player or MP3 player) can be
connected to this unit.
1. Plug one end of the AUX IN cable (included) into the AUX IN jack of the unit.
2. Plug the other end of the cable into the headphone or Line Out socket of the external
source.
3. Turn on the external audio source and adjust volume level.
4. It will play automatically after connecting the cable.
NOTE: Remove the AUX IN cable if you don't use AUX IN fuction, or the power will not be
cut off.
USB CHARGING
The apparatus can be charged by some devices that have USB slot.
1. Plug the USB cable into the USB slot of the apparatus and Plug the other end of USB
cable into the USB slot of the computer or other devices that have the USB slot;
2. Commonly, it will take 3 hours to charge the apparatus.
USB Charge voltage is 5V.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
