Safety Precaution
Read all documentations carefully before operating the equipment. Retain this manual for future reference.
Follow all instructions printed on unit for proper operation.
Do not opern cover (or back cover) to reduce the risk of electric shock or fire. There are no
User serviceable parts inside. Refere servcing to qualified service personnel.
This symbol is used to alert the operator to the presence of important operating instructions
And precautions detailed in the documentation manual.
This symbol is used to warn operators that uninsulated dangerous voltages are present
Within the products enclosure that may pose a risk of electric shock.
Warning: To avoid fire or risk of electric shock, do not expose this unit to rain or moisture.
Notes:
＊ Make sure power outlets conform to the power requirements listed on the back of the unit.
＊ Main Voltage must be correct and the same as that printed on the rear of the unit.
＊ Do not use the unit if the electrical cord is frayed or broken.
＊ The unit shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall
be placed on unit.
＊ The unit shall be connected to a mains socket outlet with a protective earth ground connection.
＊ Do not use equipment if Power plug is damaged, smashed, bent or pinched.
Warning:
＊ Using, adjusting or changing program control beyond this specification may cause dangerous radiation.
＊ The unit should be serviced by qualified service personnel.
＊ When repairing, use only same specification parts.
Notes:
Select the voltage requirement by adjusting the voltage selector switch at the rear panel.
Make sure that the power of the equipment is off and disconnected from the main voltage before switching
the voltage selector to the required setting. We will not be responsible for damages arising from the improper
installation, wiring or operation due to the fault or negligence of the user.
To Next Page
Loading...
Need help?
General
