Need help?Do you have a question about the Pyle PDC21 and is the answer not in the manual?
General| Connector 1 | 1/4'' TS |
|---|---|
| Connector 2 | 1/4'' TS, XLR |
| Depth (imperial) | 3.01 \ |
| Width (imperial) | 4.72 \ |
| Height (imperial) | 1.77 \ |
| Number of products included | 1 pc(s) |
| Product color | Black |
| Housing material | Steel |
Weight and Dimensions| Depth | 76.5 mm |
|---|---|
| Width | 120 mm |
| Height | 45 mm |
1/4" input jack for audio signals.
Parallel 1/4" output for passing signal to other devices.
Input attenuation setting (0dB, -20dB, -40dB).
Male XLR connector for balanced audio output.
Chassis ground detachment feature.
Connect instruments like guitars/basses directly to a PA system.
Tap signals from amplifier outputs like guitar amps or power amps.
Connect stereo keyboards to stage monitors and main PA mixer.
Lists frequency response, noise, THD, impedance, and dimensions.
To Next Page
