Need help?Do you have a question about the Pyramid PB-110PX and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Impedance | 4 Ohms |
| Signal to Noise Ratio | 90 dB |
| Fuse | 20A |
| Power Output (RMS/Total) | 110 Watts |
| Frequency Response | 15Hz - 30kHz |
| Input Sensitivity | 200mV - 5V |
Indicator light for system power status.
Connects to standard car stereo speaker outputs.
Adjusts signal level to match output.
Uses RCA jacks for high impedance audio input.
Protects the amplifier and vehicle electrical system.
Connects +12V DC, Ground, and Remote control wires.
Connects speakers (4 or 8 ohm) to the amplifier.
Illustrates connecting a stereo source using high impedance RCA inputs.
Shows connecting a stereo source using low impedance speaker-level inputs.
Details connecting speakers, main power, ground, and remote wires.
To Next Page
