Need help?Do you have a question about the Pyramid PB-1038GX and is the answer not in the manual?
General| Power Output | 1000 Watts |
|---|---|
| Channels | 2 |
| Signal-to-Noise Ratio | 90dB |
| Low Pass Filter | 250Hz |
| Bass Boost | 0dB |
| Dimensions | 2.25'' |
Lists key features for the PB-238GX model.
Lists key features for the PB-638GX model.
Lists key features for the PB-138GX model.
Lists key features for the PB-1038GX model.
Lists key features for the PB-1836GX model.
Details the features and controls of the 4-channel PB-238GX amplifier.
Details features and controls for 2-channel PB-738GX/PB-1838GX amplifiers.
Details features and controls for 4-channel PB-638GX/PB-1038GX amplifiers.
Lists detailed specifications for the 4-channel PB-238GX amplifier.
Lists detailed specifications for 2-channel PB-738GX/PB-1838GX amplifiers.
Lists detailed specifications for 4-channel PB-638GX/PB-1038GX amplifiers.
Illustrates power and ground wiring for 2-channel models.
Illustrates power and ground wiring for 4-channel models.
Details stereo/mono low-level input wiring for 2-channel amps.
Details low-level stereo/mono and high-level input wiring for 4-channel amps.
Illustrates speaker output wiring for 2-channel stereo models.
Illustrates speaker output wiring for 4-channel models.
Shows speaker wiring for bridged modes on 4-channel and 2-channel amps.
Provides advice on choosing a location and mounting the amplifier securely.
Advises on using correct gauge wire and connection points.
Explains the amplifier's protection circuits and LED indicator.
Offers solutions for common problems like no output or single channel operation.
Lists important safety warnings regarding operation and mounting.
Advises on correct speaker wiring configurations to prevent damage.
Details how to obtain warranty service, including RA number and shipping.
To Next Page
