Need help?Do you have a question about the Pyramid PB-101 and is the answer not in the manual?
General| Brand | Pyramid |
|---|---|
| Model | PB-101 |
| Category | Car Amplifier |
| Language | English |
Identifies and describes the key components and terminals of the PB-101 amplifier.
Identifies and describes the key components and terminals of the PB-251 amplifier.
Identifies and describes the key components and terminals of the PB-301 amplifier.
Identifies and describes the key components and terminals of the PB-601 amplifier.
Covers RCA inputs and adjusting the gain for optimal audio matching.
Details power supply connections, indicator lights, and fuse protection.
Explains speaker connections and the properties of the terminals.
Diagram and instructions for connecting via high impedance RCA inputs.
Diagram and instructions for connecting via low impedance speaker outputs.
Illustrates how to connect left and right speakers to the amplifier.
Diagrams the power supply and remote control connections from the vehicle.
Details low level RCA input for radios and equalizers, with Y-adaptor use.
Shows how to connect various speaker outputs (4CH, 3CH, 2CH, 1CH).
Illustrates using a Y-adaptor for two-channel stereo input connections.
Instructions for connecting battery, ground, and remote control wires.
Describes the Power On LED and the Protection LED indicators.
Details RCA inputs and how to adjust the gain control.
Explains adjustment of crossover frequency and its on/off switch.
Covers power supply connections and the function of the power fuse.
Details speaker terminals and tri-mode bridging capabilities for PB-601.
Explains the anti-thump delay circuit for silent turn-on.
Instructions for connecting via high impedance RCA inputs.
Instructions for connecting via low impedance inputs.
Diagram for connecting left and right speakers to the amplifier.
Details connecting battery, ground, and remote control for power.
Explains low level RCA input for radios and equalizers.
Steps for pushing the bridged/stereo switch and wiring inputs.
Wiring for stereo with right/left outputs or four channel outputs.
Diagram (Fig. 2A) showing Y-adaptor for two-channel car stereo systems.
Diagram (Fig. 2B) for four-channel car stereo systems with Y-adaptor.
Connects speaker output terminals to corresponding speakers in 4-channel mode.
Details bridging switches for 2-channel output with high-quality speakers.
Configures 3-4CH for subwoofer and 1-2CH for stereo output.
Instructions for connecting battery, ground, and remote control wires.
Guidance on choosing a location with sufficient airflow and cooling.
Instructions for securing the amplifier tightly and ensuring wiring clearance.
Steps for testing the amplifier after connections, including noise checks.
Lists technical specifications like output power, impedance, and dimensions.
To Next Page
