Pyronix CUBE-CAM/28 User Manual

IP Camera Quick Setup Guide
8
8. Tap ‘Add Device to
ProControl+ Server’ at
the bottom
9. Select ‘Connect to a
Network’
10. Take note of the on
screen instructions and
then tap ‘OK’
11. Enter the Network
SSID and Wi-Fi
Password then tap
‘Next’
12. To enable
ProControl+ services,
tap ‘Next’
13. Input the same
device password that
was created earlier and
tap ‘OK’

Pyronix CUBE-CAM/28 Specifications

General

Brand	Pyronix
Model	CUBE-CAM/28
Category	Security Camera
Language	English