To Next Page

To Previous Page

Basic commands

Lock

Press and release

The doors lock and the horn honks (if connected) and

parking lights ﬂash once. The

LOCKED

text and beeps play to conﬁrm,

and the System Status Icons update. If Valet mode* is On the doors

lock and the

VALET

text and tone play. Exit Valet mode to Lock the

system normally.

If the door was open when locking, you are notiﬁed of an active zone

immediately after locking the system. The horn in the vehicle “honks”

again. The 2-way remote control sounds a short “error” tone, and the

LCD displays the door icon.

Note: the optional door input and horn honk must be connected for

the system to give notiﬁcation.

To Lock and Panic

Press and hold

The system Locks (or Locks in Valet) and, after 2 seconds, sounds

the horn and ﬂashes the parking lights. The

PANIC

text displays

and horn honks to conﬁrm. Press the

or button to stop the

output.

ALL

6:30

Python 4706P User Manual

Questions and Answers: