38
© 2012 Directed. All rights reserved.
6. Exit the vehicle, close all the doors and arm the system.
7. The engine turns off and after a few seconds, the
REMOTE START OFF
message plays to confirm. If the door is opened in Step 3 then
the engine continues to run.
Turbo Timer Mode
The system keeps the engine running for the Turbo Timer runtime and
can be activated by remote control or optional dash mounted activa-
tion button.
1. With the engine running, set the parking brake.
2. Press the optional dash mounted activation button or perform the
Timer Mode command.
3. The parking lights turn on and the remote start activates the igni-
tion outputs. The
REMOTE START ON
text and beeps play to con-
firm.
4. Turn Off and remove the key from the ignition switch, the engine
remains running.
5. Exit the vehicle, close all the doors and arm the system.
6. The engine runs for the Turbo Mode runtime.
Note
Turbo Timer must be turned on by an authorized Directed
dealer.
To Next Page
Loading...
Need help?
General
