©
2004
Directed Electronics, Inc.
23
Transmitter Configurations
The transmitters can be programmed with the standard or single button arm/disarm configurations
by using the Auto Learn functions in the Transmitter/Receiver Learn Routine.
Standard Configuration
A transmitter/receiver that uses the standard configuration operates similarly to many factory
keyless entry remotes. A standard configuration transmitter allows arming, disarming, and Panic
Mode activation with separate buttons. When programmed for standard configuration, the trans-
mitter buttons are assigned to the following functions:
operates Arm only
operates Disarm only
operates Channel 2 and Silent Mode
operates Panic only
and operate Channel 3
The standard configuration also allows the user to utilize Multi-Level Security Arming, a feature
that cannot be accessed from a single button arm/disarm configuration transmitter.
Single Button Arm/Disarm Configuration
When programmed for single button arm/disarm configuration, the transmitter buttons are
assigned to the following functions:
operates Arm/Disarm/Panic
operates Channel 2 and Silent Mode
and operates Channel 3
To Next Page
Loading...
