EasyManuals Logo

Python 702 User Manual

Python 702
53 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
19
© 2006 directed electronics
The 2-way remote responds to active arming with one beep and
the Orange LED will flash 3-times to indicate successful arming
of the system.
If after 2-seconds the remote beeps once and the Orange and
Red LEDs flash 3-times, the system has detected an active sensor
that should be checked.
If after 2-seconds the remote beeps once, the Orange LED flashes
6-times and the Red LED lights for 3-seconds, the system has
detected an open door, hood or trunk and has been bypassed.
passive arming
The system can be programmed to arm itself automatically (called
passive arming). If the system is programmed for passive arming, it
will automatically arm 30 seconds after the ignition is turned off
and the system detects that you have left the vehicle by opening and
closing a door. Whenever the system is in its 30-second passive
arming countdown, the in-vehicle status LED will flash twice as
fast as it does when the system is armed. At the 20-second point of
the countdown, the siren will chirp to indicate that the system is
about to arm. At the 30-second point, the parking lights will flash
to indicate that the system is armed.
The 2-way remote responds to passive arming with one beep and
the Orange LED will flash 3-times to indicate successful arming
of the system.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Python 702 and is the answer not in the manual?

Python 702 Specifications

General IconGeneral
BrandPython
Model702
CategoryCar Alarm
LanguageEnglish

Related product manuals