4
© 1996 Directed Electronics, Inc.
Transmitter Channels
Channel I
The arm/disarm and panic functions, are usually controlled by Button I.
Channel II
The Silent Mode
™
/trunk release function, is usually controlled by Button II.
Silent Mode
™
and Remote Valet
®
work by pressing button II for less than one
second. Trunk release requires you to press Button II for 1.5 seconds.
Channel III (for options)
Usually controlled by pressing Buttons I and II at the same time.
These assignments can be changed if needed, such as for two-car operation
from one remote.
Button II
Button III
Button I
LED
To Next Page
Loading...
Need help?
General
