Q Acoustics Concept Series - Speaker Positioning; Concept 40 Placement Guidelines; Concept 20 Placement Guidelines

Bi-Wiring
Directly connecting the treble and bass networks of a loudspeaker to an
amplier improves both bass performance and dynamic range.
To bi-wire: Prepare two twin cables for each loudspeaker. Unscrew all the
loudspeaker terminals and remove both links. Now connect the treble terminals
and the bass terminals to the amlpier following the procedure described in
Standard Wiring. Refer to the illustration below.
Stereo Connections
Standard Connections
Connect the RED (+) terminal of the RIGHT loudspeaker to the RED, Positive (+)
terminal on the RIGHT channel of the amplier. Connect the BLACK (-) terminal
of the loudspeaker to the matching BLACK, Negative (-) terminal of the amplier.
Repeat this procedure for the LEFT channel.
Connecting Passive Loudspeakers
When your speakers are connected: Switch on the system and play some music
at moderate level. Fine tune the speaker placement to suit.