Q CELLS Q.HOME PLUS ESS-G1 3.6 User Manual

CAUTION
Do not operate with other components not approved by the ESS systems.
(Connecting other products in parallel to Q.HOME+ ESS-G1 3.6 may result in
abnormal operation.)
The internet connection is required to use all functions of the ESS system.
If you have a problem, please contact the installer.
The Specications of the product may be modied without prior notice to improve
product quality.
United Kingdom (Eng) 06/2017 Rev01

Q CELLS Q.HOME PLUS ESS-G1 3.6 Specifications

General

Brand	Q CELLS
Model	Q.HOME PLUS ESS-G1 3.6
Category	Inverter
Language	English

Summary

Safety

Intended Use

Defines the specific residential applications for which the device is designed.

Installation Application Suitable for Safety

Details safe installation practices and application suitability for residential use.

Technical Specifications

Provides detailed technical specifications of the device's performance and components.

Safety Guidelines

Outlines critical safety precautions and warnings for operation and handling.

Operating Modes

Descriptions of Operation Mode

Details the various operational modes of the system, including PV Auto and Standby.

PV-Auto Mode

Explains the mode where solar generation and battery charge/discharge are active.

PV-Only Mode

Battery-Discharge Mode

Event Check Mode

Starting the System

Provides steps for powering on and initiating the system after installation.

Turning off the System

Explains the procedure for safely shutting down the system.

Communication

Components and LAN Connection

Homepage

Monitoring

Details how to check the real-time operational status and event codes.

Maintenance for Problem Solving

Fan Exchange

Checking the Event Logs

Explains how to check event messages on the website for troubleshooting.

Checking the Terminals

Guidance on inspecting terminals for proper connection and corrosion.

Message Description

General Events

Classifies general warning and protection events encountered by the system.

INVERTER General Events (Warnings)

Lists and explains warning messages related to the inverter's operation.

INVERTER General Events (Protection)

Details protection events for the inverter and their resolution.

Battery Discharge General Events

Significant Events

Describes significant system events that cause operation to stop.

PV General Events (Protection)

System General Events (Protection)

BMS General Events

EMS/Communication Events

Single Fault Events

Lists specific fault events and their potential causes.

Contact

Contact Information