Q CELLS Q.PEAK DUO-G10 Series User Manual

12 13INSTALLATION AND OPERATION MANUAL SOLAR MODULES Q.PEAK DUO-G10.X – Q CELLS INSTALLATION AND OPERATION MANUAL SOLAR MODULES Q.PEAK DUO-G10.X – Q CELLS12 13
Note! Module damage may occur!
Ä Do not stack modules.
Note! Module damage may occur!
Ä Do not install modules near flammable
gas / vapors.
Ä Do not install modules in close proximity to air
conditioning systems.
Note! Module damage may occur!
Ä Do not drop modules.
Note! Module damage may occur!
Ä Only make modifications to the module which
have been confirmed in writing by Q CELLS.
confirmation
letter
Note! Module damage may occur!
Ä Never lift or move the module with the
connection cables or junction box.
Ä Carry modules upright and horizontally as
shown.
Note! Module damage may occur!
Ä Never step on modules.
Ä Do not subject modules to any mechanical
stress.
Ä Do not allow any objects to fall onto modules
3 INSTALLATION
3.1 SAFETY AND TRANSPORT
Danger! Risk of fatal injury due to electric
shock!
Ä Block off the installation zone.
Ä Keep children and unauthorized individuals
away from the solar power system.
Danger! Risk of fatal injury due to electric
shock!
Ä Ensure that modules and tools are not subject
to moisture or rain at any time during instal-
lation.
Warning! Risk of injury due to falling
modules!
Ä Secure modules during installation.
Ä Do not install modules in windy or wet
weather.
Danger! Risk of fatal injury due to electric
shock!
Ä Only use dry, insulated tools.
Ä Do not carry out the installation alone.
• Only install undamaged modules and
components.
Ä Do not modify the module
(e.g. do not drill any additional holes).
3 INSTALLATION
3.2 PREPARATION OF INSTALLATION

Q CELLS Q.PEAK DUO-G10 Series Specifications

General

Cell Type	Monocrystalline
Operating Temperature	-40°C to +85°C
Product Warranty	12 years
Performance Warranty	25 years
Temperature Coefficient (Pmax)	-0.35 %/K
Technology	Half-cut cell
Cell Count	120 (6 x 20)