Q-Connect KF01606 - Rounding Selector; Rounding Methods; Decimal Place Selector; Decimal Place Settings

4
rOunDIng SElEcTOr
Species the rounding system used in all calculations. Use the decimal
place selector (see below) to set the number of decimal places.
Rounds up the decimal to the specied number of places.
5/4 Rounds o the decimal to the specied number of places.
Rounds down the decimal to the specied number of places.
DEcIMal PlacE SElEcTOr
Specied the number of decimal places for rounding:
F Floating decimal place. The value is not rounded up or down.
0 The number of decimal places is set to ‘0’
2 The number of decimal places is set to ‘2’
4 The number of decimal places is set to ‘4’
A 2 decimal places are displayed automatically, even if the decimal
point key is not used.
PErFOrMIng calculaTIOnS
Example Key Operation Display
6 + 7 = 13 [6][+][7][=] 13.
10 - 4 = 6 [1][0][-][4][=] 6.
7 x 5 = 35 [7][x][5][=] 35.
14 ÷ 7 = 2 [1][4][÷][7][=] 2.
Calculate 6% of 200 [2][0][0][x][6][%] 12.
Calculate 20% discount from €150 [1][5][0][x][2][0][%] 30.
Mark up €150 by 20% [1][5][0][x][2][0][MU] 180.
Calculate the mark up where the cost price is €80 and the selling price is €150
[1][5][0][-][8][0][MU] 87.5
Calculate the price + tax and the tax on a €150 nett price
[1][5][0][TAX+] 162.
Note: Tax is 8% [TAX+] 12.
Calculate the price - tax and the tax on a €162 price (incl. tax)
[1][6][2][TAX-] 150.
Note: Tax is 8% [TAX-] 12.