Q-Connect KF01606 - Setting the Tax Rate; Replacing the Battery; Care and Maintenance

5
30 x 40 = 1200 + [3][0][x][4][0][M+] 1200.
50 x 60 = 3000 + [5][0][x][6][0][M+] 3000.
25 x 30 = 750 + [2][5][x][3][0][M+] 750.
235 x 35 = 8225 . [2][3][5][x][3][5][M-] 8225.
[MRC] -3275.
8 x 6 [ON/AC][8][x][6][=] 48.
23 x 45 [2][3][x][4][5][=] 1035.
= [GT] 1083.
SETTIng ThE Tax raTE
. Press and hold the [TAX SET] key until ‘0’ is displayed. ‘TAX %’ is also
displayed.
. Input the tax rate and then press [TAX SET] again. The tax rate is set.
. To check the tax rate, press [TAX SET] and the rate will be displayed.
rEPlacIng ThE BaTTEry
. Remove the screws that hold the back cover in place and remove the
cover and the old battery
. Wipe the new battery with a dry soft cloth and place it into the calculator
with the positive (+) side facing up.
. Replace the back cover and secure with the screws.
. Press [ON/AC] to turn the power on.
. Note: A dead battery can leak and damage the calculator if left in the
battery compartment for long periods.
carE anD MaInTEnancE
. Keep the calculator dry. If it gets wet, dry before use.
. Do not use harsh solvents or detergents to clean the unit. Wipe with a
soft, dry cloth to clean.
. Do not drop or strike the calculator.
. Do not bend or twist the calculator.