Q-See QCW3MP1B User Manual

The micro SD memory card slot is located under
the bottom panel of the camera. Push the card
in rmly to load the card. To eject, press the card
rmly again. Some units will include an SD card.
If you wish to change the existing Wi-Fi network
to a dierent network, while the camera is
powered on, hold the reset button for 15
seconds and setup your camera again.
14
ADDITIONAL FEATURES
MICRO SD MEMORY CARD CAMERA RESET BUTTON
NOTE: SD memory card slot and reset button can both be accessed by removing the bottom panel
from the camera with a standard screwdriver. Reattach panel before mounting cameras.

Q-See QCW3MP1B Specifications

General

Brand	Q-See
Model	QCW3MP1B
Category	Security Camera
Language	English