Need help?Do you have a question about the q-Tech Q-P019 and is the answer not in the manual?
General| Brand | q-Tech |
|---|---|
| Model | Q-P019 |
| Category | Paint Sprayer |
| Language | English |
Lists various materials suitable for spraying with the unit, including wood, ceilings, and exterior surfaces.
Guidelines for maintaining a clean, well-lit, and safe work environment, avoiding hazardous atmospheres.
Precautions related to power cords, plugs, grounding, and avoiding wet conditions to prevent electric shock.
Advisories on staying alert, using common sense, and wearing appropriate safety equipment during operation.
Crucial warnings on proper handling, avoiding overreaching, dressing appropriately, and keeping clear of moving parts.
Emphasizes immediate medical attention for high-pressure fluid injection injuries, which require surgical treatment.
Instructions to ensure the spraying area is free from obstructions and well-ventilated to safely remove vapors.
Safety measures for operating the spray gun, including using the safety latch, cleaning tips, and handling clogs.
Guidelines for handling toxic fluids and ensuring the safe use and grounding of hoses to prevent injury.
Instructions on grounding the sprayer, hoses, gun, and solvent pails to prevent static sparking, fire, or explosions.
Safety precautions when using flammable paints and thinners, including ventilation and grounding requirements.
Step-by-step instructions for securely attaching the hose to the pump and spray gun using a wrench.
Guidance on initial setup, including flushing for new sprayers, pressure relief, and general flushing steps.
A procedural guide for flushing the sprayer with appropriate fluids to clean internal components.
Steps to remove air and fluids from the pump and lines to prepare for spraying.
Instructions for correctly installing reversible spray tips and tip guards onto the spray gun.
Guidance on adjusting pressure and technique to achieve the desired spray pattern quality.
Procedures for clearing blockages in spray tips, including pressure relief and cleaning methods.
Information on choosing the correct spray tip orifice size and fan pattern, and recognizing wear.
Steps to properly clean the pump, hose, and gun at the end of the day to prevent material drying.
Instructions for preparing the pump for long-term storage using a protective conditioner.
Recommended maintenance activities to perform after every hour of spraying for optimal performance.
Daily checks for packing nut leakage and lubrication of the displacement pump packing nut.
Information on pump packings as wearing parts and procedures for their eventual replacement.
Guidance on identifying worn carbon brushes and the procedure for replacing them.
Procedures for cleaning accumulated dust from the motor and lubricating the gear case.
Common problems related to the motor not running, turning, or overheating, with checks and solutions.
Troubleshooting steps for pump priming failures, pressure problems, and low output.
A visual representation of the electrical connections between various components of the sprayer.
A detailed diagram showing all parts of the sprayer with numerical identifiers for easy reference.
A comprehensive list of all parts with their respective Q-TECH part numbers and quantities.
Contact details and addresses for Aristospray UK's London and Dublin offices.
To Next Page
