5
f)Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are
easier to control.
g)Use the power tool, accessories and
tool bits etc., in accordance with these
instructions and in the manner intended for
the particular type of power tool, taking into
account the working conditions and the
work to be performed. Use of the power tool
for operations different from intended could
result in a hazardous situation.
Service
Have your power tool serviced by a
qualified repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
If the supply cord of this power tool is
damaged it must be replaced by a specially
prepared cord available through the service
organization.
Specic safety rules for Airless Sprayers
HANDLE THIS UNIT AS YOU WOULD A LOADED
WEAPON!
Extreme high pressure spray can cause
extremely serious injury.
OBSERVE ALL WARNINGS!
SPECIFIC SAFETY RULES
WARNING: HIGH PRESSURE. Never leave
pressurized system unattended. Always
follow the Pressure Relief Procedure.
Take precautions to avoid high pressure
component rupture.
DANGER: INJECTION INJURY. Skin injection
by high pressure paint is not a simple cut. It
must be treated surgically immediately.
WARNING: FIRE AND EXPLOSION HAZARD.
Take all precautions to avoid sources of
sparks and ignition when spraying. Keep the
machine at least 8 meters away from the
spraying operation.
WEAR PROTECTIVE EQUIPMENT AT ALL TIMES.
Always use a respirator, eye protection and
protective clothing.
Keep clear of moving parts when starting
or operating the sprayer. Do not put
your fingers into any openings to avoid
amputation by moving parts or burns on
hot parts. When starting the motor, maintain
a safe distance from moving parts of the
equipment.
Before adjusting or servicing any mechanical
part of the sprayer, follow the PRESSURE
RELIEF PROCEDURE.
EXPLOSION RISK FROM HALOGENATED
HYDROCARBON SOLVENTS
Never use halogenated hydrocarbon
solvents in this machine.
To Next Page
Loading...
Need help?
General
