Qazqa 91342 - General Precautions

1
)
General
P.3
 B
efore carrying ou
t
any work on the fan, disconnec
t
it from the electrical supply!
 C
heck if the electrical specifications of this appliance are compatible with your installation. The suppler
accepts no responsibility for any physical injur
y
or material damage resulting from incorrect use or installation
of this fan. If you have the slightest doubt, please contact electrician.
 U
nauthorized use and technical modifications to the appliance can lead to danger to life and health.
 T
his appliance can be used b
y
children aged from 8 years and above and persons with reduced physical,
sensor
y
or mental capabilities or lack of experience and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe wa
y
and understand the hazards involved. Children shall
no
t
play with the appliance. Cleaning and user maintenance shall no
t
be made b
y
children withou
t
supervision
 C
hildren should be supervised to ensure tha
t
they do no
t
play with the appliance.
 T
hisapplianceisforindooruseonly.
 M
eans for disconnection mus
t
be incorporated in the fixed wiring in accordance with the wiring rules.
 N
ever install the appliance in a mois
t
or wet room.
 B
e careful when working near the rotating blades. The fan should be installed a
t
leas
t
aheigh
t
of 2.3m
 B
efore pushing the reversible slide switch, i
t
is necessary to stop the action of the blades b
y
turning off the fan
 D
on’
t
place your arm or other objec
t
in the path of the blades, when the fan is operating.
 A
lways maintain the minimum distance between the lamp and any inflammable material
(curtains, wall etc), as indicated on the pictogram
 M
eans for all poles disconnection having a contact separation tha
t
provide full disconnection under over
voltage categor
y
III conditions mus
t
be incorporated in the fixed wiring in accordance with national wiring
rules.
 P
ower suppl
y
wire from ceiling needs 1.5 sq mm wire
W
arning: Before obtaining access to terminals, all suppl
y
circuits mus
t
be disconnected.