Qazqa 91342 - Installation Guide

7. Installation of the ceilin
g
fa n
1. Install the mounting Bracket b
y
screw
(Fig.1)
2. Inser
t
downrod over upper canop
y
(Fig 2 3)
3. Then, insert the cross pin over yoke and
Cotter pin(Fig4)
4. Remove the 2 screws from the rectangular
cover on the motor housing and remove the
plate,inser
t
the blades through the slots
around the motor. Align the blade with the e
three holes,and secure the three screws
through the opening. Tighten all blade screw
evenly and get the rectangular cove secured
b
y
screws (Fig 5)
5. Connect the wire as the fig show (Fig 6)
6. Insert the remote control into the mounting
bracke
t
(fig 7)
P.6