To Next Page

To Previous Page

Connect the main leads to a standard 230V+10% (50Hz+1Hz) electrical supply

which has protection devices of under-voltage, over-voltage, over-current as well

as a residual current device (RCD) which maximum residual current rated at

0.03A.

CONTENTS OF THE SHIPPING CONTAINER

A. Log Splitter

B. Support Leg

C. Owner’s Manual

D. Loose Part Bag (containing)

M8 Bolts & Nuts

Note : Hardware to mount this log

spliter to a work bench is NOT

supplied

1 set

1 pc

5 sets

SET UP AND PREPARATION FOR OPERATION

1. Bolt the Support Leg to the Log Splitter, lift the log splitter by the handles at

both ends and place it on a 60 – 75cm high, stable, flat and level work surface.

2. Familiarize yourself with the controls and features of this log splitter in the

illustrations.

Questions and Answers:

Need help?

Do you have a question about the QCI LS5T-52 and is the answer not in the manual?

QCI LS5T-52 Specifications

General