QCY T1C - Functionality and Tips; Detailed Functions and Operations; Usage Tips

8
Function
Function
Current Status
Operation
Led
Prompt
Power-on
Power-off
Hold MFB for 2s
LED blink blue
TONE
Earbuds are
charged
Pick up earbuds
from case
TONE
Power-off
Power-on
Hold MFB for 5s
LED glows red
for 2s
TONE
Earbuds are
power-off and
out of case
Push earbuds in
case
LED glows solid
red
\
Factory Setting
Power-off
Hold MFB for 10s
LED blinks red
and blue 3
times
TONE
Answer/end
call
Incoming
call/calling
Press MFB
\
\
Ignore call
Incoming call
Hold MFB for 1s
\
\
Voice assistant
Connected
Tripple press MFB
\
\
Music
pause/resume
playing
Playing
Press MFB
\
\
Skip track
Playing
Double press MFB
on right/left earbud
to skip track
forward/backward
\
\
Switch call to
earbud
Call handled by
phone
Hold MFB for 1s
\
\
Switch call to
phone
Call handled by
earbuds
Hold MFB for 1s
\
\
Tips
1. Before using the headset, please read the manual carefully and keep it for future
references.
2. The headset need to be fully charged prior to first-time use.
3. If the headset is left unused for over two weeks, please recharge it periodically.
4. Please use the chargers made by qualified manufacturer.
5. If the headset cannot be found by your phone, please check whether it is in
pairing mode, if left unconnected for a long while, the headset will exit pairing
mode, please re-enter the mode, if procedure error of your phone occurs, reboot
it, if a procedure error of the headsetoccurs, reboot or reset it.