Do you have a question about the Qdos Adhesive Double Door Lock and is the answer not in the manual?
Lists the components included with the lock.
Warns about potential door and hinge damage from excessive force.
How to install the lock on the top edge of the door.
How to install the lock on the side of the door.
Guidance on storing the lock to keep it handy and out of reach.
Steps for carefully removing the adhesive storage post from surfaces.
The Qdos Adhesive Double Door Lock is a safety device designed to prevent children from slamming doors, thereby protecting both the child and the door/hinges from damage. This easy-to-install guard is suitable for doors with a thickness ranging from 1.25" to 1.75" (30-45 mm).
The primary function of the Qdos Adhesive Double Door Lock, also referred to as a Finger Slam Guard or Finger Door Slam Protector, is to act as a buffer that prevents a door from fully closing and slamming shut. This is achieved by clamping the device onto the door, which then creates a gap between the door and the frame, or between two doors, preventing the door from closing completely. This mechanism is crucial for child safety, as it eliminates the risk of fingers being pinched or crushed in a closing door. The device is designed to be robust enough to withstand the force of a closing door while also being gentle enough not to mar or damage the door surface itself when properly installed and used.
The Qdos Adhesive Double Door Lock offers flexibility in its placement on a door, depending on the desired outcome and the type of door.
Top of Door Placement: This is the preferred and recommended location for the Finger Slam Guard. When clamped on the top of the door, it should be positioned approximately 12 inches (30 cm) in from the front edge. This placement creates a wide and safe opening, effectively preventing the door from slamming shut. This position is particularly effective for single doors and ensures that the door remains ajar, reducing the risk of accidental lock-ins or finger injuries.
Side of Door Placement: Alternatively, the Finger Door Slam Protector can be clamped on the side of the door. When using this position, it is crucial to place the device at approximately eye height for an adult. A critical safety instruction for this placement is to "Never position within child's reach." This ensures that the child cannot tamper with or remove the device, maintaining its effectiveness as a safety measure. This placement might be more suitable for double doors or situations where a top-of-door placement is not feasible or desired.
Users are strongly advised to carefully read and follow all instructions provided in the installation guide. Qdos emphasizes that proper installation is key to ensuring the safety of children and preventing damage to the door.
A significant warning is highlighted: "Excessive force on the door while Finger Slam Guard is clamped on door might cause damage to door and hinges." This indicates that while the device is designed to prevent slamming, it is not intended to withstand extreme force applied to the door. Users should be mindful not to forcefully push or pull the door when the guard is in place, as this could potentially strain the door's structure or its hinges. This warning underscores the importance of understanding the device's limitations and using it as intended—as a preventative measure against accidental slamming, not as a barrier against forceful manipulation.
To ensure the Finger Slam Guard remains handy and out of reach for children when not actively in use, an Adhesive Storage Post is included. This feature promotes convenience and continued safety.
Should there be a need to permanently remove the Adhesive Storage Post, specific instructions are provided to minimize damage to the surface.
In summary, the Qdos Adhesive Double Door Lock is a thoughtfully designed child safety device focused on preventing door slams. Its flexible placement options, dedicated storage solution, and clear instructions for installation and removal, coupled with important safety warnings, aim to provide a comprehensive solution for protecting children and maintaining the integrity of household doors.
| Type | Double Door Lock |
|---|---|
| Mounting Type | Adhesive |
| Material | Plastic |
| Color | White |
| Installation Method | Adhesive |
| Compatibility | Double Doors |
| Package Contents | 2 locks |
Loading...