15
top and bottom.
Each Extension
comes with Spindle
Housing already
inserted, so the
Spindles can be
inserted directly
into the last
Extension on each
side. When adding
multiple extensions,
make sure to add
them on every
other side of the
gate, unless there is
only one Extension
used. Example – If using 1, put it on the hinge side; if
using 3, put two on the hinge side and 1 on the locking
side, etc.
Now go to Step 2 for instructions how to install the
complete gate.
GATE OPERATION
To open the gate slide back the locking latch on the
handle, then at the same time lift the gate and open the
door. After passing through the gate, push the door the
closed position.
To Next Page
Loading...
