18
Specifications
MP50 Specifications
For additional assistance contact QED Service at:
Phone:
Fax:
E-mail:
24-Hour Service Hot Line:
1-800-624-2026
1-734-995-2547
1-734-995-1170
1-800-272-9559
service@qedenv.com
Temperature Range:
Humidity:
Protection:
Dimensions:
Weight:
Case Material:
Keypad:
Display:
Window:
Controller Power:
Controller Battery Life:
Drain:
Reserve:
Emergency battery:
Compressor Power:
*Max. Lift:
Output:
Max. Pressure:
Operating Temperature:
Connection to MP30 Drawdown Meter:
Operating range of -20º F to +120º F
Circuitry sealed to provide operation to
100% humidity
Circuitry protected against transient surges
introduced from improper battery installation
or switch connections
16" x 13" x 6.5"
21 lbs
Structural Resin
6 keys
LCD display, 32-character (2 lines, 16
characters, each)
Non-glare, double hardened optical acrylic
3 “AA” Batteries
50,000 Cycles @ 70° F (21° C)
Unit off: 2mA, Unit on: 4mA, Valve Cycle:
6mA
100 hours operating time (1sec/1sec cycles)
with fresh AA alkaline cells At 65º F (approx.)
3 AA cells stored within battery compartment
12 VDC (Battery Cable)
200 Feet (60 m)
0.21 SCFM@ 100 psi (0.357 m 3/h@ 6.89
kPa)
105 psi (7.24 kPa)
-20º - 120º F (-29º - 49º C)
Heavy-Duty Cable (Supplied with MP30)
*Pump flow rates in deeper wells (>100 feet) will be reduced, especially for pumps with less than 10 feet liquid submergence.
To Next Page
Loading...