QEO FMM5 - Multimeter DC Voltage Specifications; Multimeter AC Voltage Specifications

14
EN
LIGHT
Measuring range
Overrate display
Accuracy
Repeatability
Temperature characteristic
Photo detector
200, 20.000lux (20.000lux range reading x10)
Highest digit of “1” is displayed
+ 5 % rdg + 10 dgts (calibrated to standard incandescent
lamp at colour temperature 2856 k)
+ 2 %.
+0.1 % / °C
One silicon photo diode with filter
HUMIDTIY / TEMPERATURE
Measurement range
Temperature
Resolution
Accuracy (after calibration)
· Humidity
· Temperature
Response time
· Humidity
Temperature
2 % - 95 % RH relativ humidity (RH)
-20 - + 200, -20 - +1300
0.1 % RH, 0.1 °C, 1°C
+ 5 % RH (at 25°, 35 % - 95% RH)
+ 6 % RH (at 25°C, 10 % - 35 % RH)
+3 % rdg ± 1°C (at -20°C - +200°C)
+ 3.5 % rdg ± 5 dgts (at 20°C - +1300°C)
45 % RH -> 95 % RH < 10 min.
95 % RH -> 45 % RH < 15 min.
1°C / 2 sec
MULTIMETER
DC Voltage
Range Resolution Accuracy
200V 0,1mV +0.5 % of rdg + 2 dgts
20V 10mV +0.5 % of rdg + 2 dgts
600V 1V +1.0 % of rdg + 2 dgts
Input impedance: 1MΩ
Overload protection: 220Vdc or ac rms. for 200mV range and 600V DC or 600V AC rms for other ranges
AC Voltage
Range Resolution Accuracy
200V 100mV +1,2 %of rdg + 10dgts
600V 1V +1,2 %of rdg + 10dgts
Input impedance: 1MΩ
Frequency range: 45 to 450Hz
Maximum input: 600V DC or 600V AC rms