EasyManuals Logo

QERIDOO Speedkid2 Q200-L User Manual

QERIDOO Speedkid2 Q200-L
19 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
12 – 02|2017 – Subject to change. Speedkid2 Speedkid2 Subject to change. – 02|2017 – 13
AssemblyProduct overview
Below you can read all the information that you will need to assemble your Speedkid2 properly.
f Make sure that you have sufficient space to assemble it.
Also pay attention to the door width at the place of installation: The
Speedkid2 is 85 cm wide
with the wheel guards fitted.
f Have a size 4 hex key to hand (not supplied).
f Perform each of the instructions step by step.
f If necessary, follow the QR code to call up a video about
assembly and operation on the Internet.
Danger!
Never perform assembly work if there are children in the cabin. Keep children away
from the vehicle during assembly.
When handling moving components, make sure that your hands or fingers do not get
trapped.
Unfolding the cabin
f Place the collapsed cabin in the assembly area.
f Stand in front of the cabin and hold it securely by the
front tube of the main frame.
f With your other hand, grip the tube of the rear roof
support and fold it all the way to the back.
f Hold each of the side tubes of the FX folding system by
the lower part of the hinge.
f Press both hinges down until they engage audibly.
f Open the zip fasteners and the Velcro fastener of the
2-in-1 canopy in order to enable the stabiliser rods to
be fitted.
The stabiliser rods secure the folded-open cabin by connecting the rear roof support to the front
one inside the cabin (see the illustration in chapter “Spare parts” on page 34). The pre-fitted
tube clamps of the stabiliser rods are placed with gentle pressure onto the tubes of the roof
supports in order to achieve this. The tube clamps are preset so that the connection can be made
slightly above the rear side windows:
Accessories
Using the accessories listed here, you can extend your Speedkid2 and optimally adapt it to suit
your needs and the age of your children:
Coupler
Art. no.: E77-K
Rear light, battery operated
Art. no.: FK589
Jogger air wheel with hand brake
Art. no.: 8956-14
Baby seat
Art. no.: 12578
Baby seat, variable-length
Art. no.: BS.04.013.00
Comfort insert
Art. no.: S-58697
Seat cushion
Art. no.: SI-656
Rain cover
Art. no.: 02133
Folding garage
Art. no.: 035689
You can find our current list of dealers on the Internet at:
http://dealerlocator.qeridoo.de

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the QERIDOO Speedkid2 Q200-L and is the answer not in the manual?

QERIDOO Speedkid2 Q200-L Specifications

General IconGeneral
TypeBicycle Trailer
ModelSpeedkid2 Q200-L
BrandQERIDOO
Capacity2 Children
FoldableYes
Weather ProtectionYes
Storage CompartmentYes
Wheel Size20 inches
SuspensionLeaf spring suspension

Related product manuals