Need help?Do you have a question about the QFX PBX-100 and is the answer not in the manual?
Ensure the power cord is clear of foot traffic and heavy objects; grasp the plug firmly when disconnecting.
Place the unit in a well-ventilated area with at least 10cm space on each side, avoiding coverings.
Do not dismantle the casing; contact a service center for any necessary repairs.
Immediately turn off power and seek repair if the unit emits smoke or a strange smell.
Highlights include Bluetooth, MP3 playback, FM radio, inputs, equalizer, and a rechargeable battery.
Connect to AC power (110-240V) for operation and battery charging; charging indicator lights are present.
The speaker can be charged using a 12V external car battery via the DC 12V input.
Select Bluetooth mode, ensure the Bluetooth light blinks, and pair your device by searching for the model.
Full charge takes approximately 8 hours; charge immediately when low and at least monthly for battery health.
Power off the unit when not in use to conserve battery life.
Explains the operation of various buttons on the remote control for playback and source selection.
Controls for power, LED light, FM antenna, TF/SD card, USB, and AUX input connections.
Controls for master volume, bass, microphone echo, microphone bass, microphone treble, and microphone volume.
Includes guitar volume, microphone priority switch, guitar input, and microphone input.
Features a 5-band graphic equalizer and a DC 12V input for charging.
Descriptions for power, LED light, power input, master volume, bass, mic echo, and mic/guitar volume controls.
Details on microphone priority, guitar input, and microphone input functionalities.
Instructions for mode selection, recording, repeat function, play/pause, and track navigation.
Information on FM antenna, equalizer, 12V external input, and AUX input.
To Next Page
General
