QFX PBX-1211 User Manual

User Manual
PBX-1211
PORTABLE BATTERY SPEAKER
3
Specifications:
Power: 20W
Frequency Response
for main speaker: 55Hz-20KHz
Power Supply: DC9V
(4)
Press to enter into FM radio mode, press SCAN to enter into radio program
automatic scan. Press for radio program manual scan, Top and bottom
trimming, Turn the TUNER button radio station can be adjusted. Slide around to
adjust radio frequency between 87.5MHz~108.0MHz.
(5) Bluetooth connection
Press to enter into Bluetooth Control connection page, then click "Speaker
Pro BLE" to connect to the speaker.
(6)Line In input - mute
Press to enter into Line IN input page, press to mute music, press
insert a line continue play. Press "Back" to main page.
(7) Equalizer regulation
FM Radio
Press to enter into Sound Set page, and then turn volume or bass or treble to
adjust the volume. There are 4 pre-set EQ modes: dance, Classical, Jazz and Rock.
You can also press G-Eq to access the graphic equalier to set up your preferred
equalize specification.
（7）（6）（5）
（4）
FM Operation
Lightly press Power/Input button to switch to FM mode, long press PLAY/PAUSE
button to automatically scan radio station, by pressing PREVIOUS or NEXT you
can select a previous or next song.
Bluetooth:
Press the POWER/INPUT button on the panel control to select Bluetooth mode.
Simultaneously open the Bluetooth setting on your phone, tablet or any other
Bluetooth enabled audio device and select "QFX PBX-1211". The unit and device
will then connect via Bluetooth.To control the device via your phone, tablet etc
please download the App "Speaker Pro".
Once the unit and device are connected via Bluetooth, open the "Speaker Pro" App
on your phone, tablet etc and press the Bluetooth button. This will enable you to
control the following five modes on the device from your phone: Music, Light,
USB Card, Bluetooth and Equalizer. To cancel the app, press the exit button.

QFX PBX-1211 Specifications

General

Brand	QFX
Model	PBX-1211
Category	Speakers
Language	English

Summary

FM Radio Operation

FM Operation

Lightly press Power/Input button to switch to FM mode, long press PLAY/PAUSE button to automatically scan radio station.

Bluetooth Connectivity

Bluetooth Connection

Press the POWER/INPUT button to select Bluetooth mode and connect your phone or tablet.

Equalizer and Sound Settings

Equalizer Regulation

Adjust volume, bass, or treble, and select from 4 pre-set EQ modes or use G-Eq.

Product Specifications

Technical Specifications

Details on power output, frequency response, and power supply requirements.

Panel Layout and Functions

Control Panel Components

Overview of buttons, ports, indicators, and controls on the speaker's panel.

Basic Operation Guide

Power and Input Selection

Long press to turn on/off, short press to cycle through modes (USB, FM, Line, BT).

Volume and Tone Control

Adjust master volume, treble, bass, and microphone volume via knob and button presses.

Playback Control

Play or pause music. Long press in FM mode for auto-scan and save.

Track Navigation

Switch between songs or radio stations.

TWS Bluetooth Pairing

Pair two speakers for stereo sound or connect a mobile device via Bluetooth.

LED Light Mode Adjustment

Adjust LED light brightness and effects by pressing the LIGHT button.

USB Player and Power Bank

Use the USB port for playback or as a 5V 1A power bank output.

App Control Features

Bluetooth Music Play

Control music playback, select songs, and adjust volume via the Speaker Pro App.

USB Card Play

Manage music playback from a connected USB card through the App.

Light Control via App

Select colors, brightness, and light flash modes for the speaker's LEDs using the App.