QHYCCD QHY168C User Manual

QHY168C
5
8. After you connect 12V power supply for QHY168C to power the TEC cooling circuit, you can
set the CMOS sensor cooling temperature in the "Thermal Controls" section in SharpCap as
shown in the following picture.
Basically, you can control the temperature of CMOS by either adjusting "Cooler Power" or
clicking "Auto" and adjusting "Target Temperature". You can also see the CMOS temperature
at lower-left corner of the software.
Before use this function, you should read the content about how to protect the cooler in the
FAQ section.

QHYCCD QHY168C Specifications

General

Brand	QHYCCD
Model	QHY168C
Category	Security Camera
Language	English