Push the remote button,LED indicator on the receiver board will ash then come off.
After 3 seconds , the LED indicator will be on again , learning successfully .
Learning the code :( Latching )
Note: When you choose for latching mode , in order to learn more remote control , you
need to learn two different button , the rst time learnt is for "ON", the second time learnt
for "OFF".
For example : button A = ON , button B = OFF
Push the learning key on the receiver triple time , it comes into latching mode .
Wait for a moment , the LED indicator on the receiver board will ash then come off.
Push the remote button A .
LED ash for 5 times .
Push the remote button B .
Led ash for 5 times .
After 3 seconds , the LED indicator will be on again , learning successfully.
A = ON , B = OFF .
Applications
1.wireless power switch, socket, remote control switch, receiver module,
2. access control, electric cars, motorcycles, automobile anti-theft products, remote door
openers, closers control system
3. security, surveillance systems, home security products, electric doors, alarm host, alarm
4. rooms controls, shutter doors, windows, remote control socket, remote control LED,
remote audio remote control electric doors, garage door remote control, remote control
retractable doors, remote rolling gates, sliding door
5. smart home products, remote control curtains, remote MP3, audio
Specications
Model Number:RX480E-4
Working Temperature : -25~75C
QIACHIP RX480E-4 receiver module Instructions manual | 433.92MHz... https://qiachip.com/en-de/blogs/usermenu/qiachip-433-92mhz1527-lear...
3 von 16 25.02.2023, 11:43
To Next Page
Loading...
