Introduction of working mode:
1. Press the learning button on the module 1 time. After the remote controller learns, it
enters the jog mode;
2. Press the learning button on the module twice, and the remote controller will enter the
self-locking mode after learning;
3. Press the learning button on the module 3 times, and the remote controller will enter
the interlock mode after learning;
4. Press the learning button on the module 4 times. After the remote control learns,
Enter two-way self-locking + two-way jog mode;
5. Press the learning button on the module 5 times. After the remote control learns,
Enter two-way jog + two-way interlock mode;
6. Press the learning button on the module 6 times. After the remote control learns,
QIACHIP RX480E-4 receiver module Instructions manual | 433.92MHz... https://qiachip.com/en-de/blogs/usermenu/qiachip-433-92mhz1527-lear...
8 von 16 25.02.2023, 11:43
To Next Page
