Why Qihan Other dome device performs auto action periodically?
If the Qihan Other dome device performs auto actions periodically, it means that no transmission auto “call back” function is set to the dome device. Called this setting.
Why Qihan PTZ rotates one circle when being controlled?
If the Qihan Other rotates one circle when being controlled after working normally, the system is likely checking the data again. This is a normal event.
General| Sensor | 1/2.8" Progressive Scan CMOS |
|---|---|
| Horizontal Rotation Range | 360° |
| Video Resolution | 1920x1080 |
| Digital Zoom | 16X |
| WDR | 120dB |
| IR Distance | 100m |
| Ingress Protection | IP66 |
| Type | PTZ |
| Aperture | F1.6~F3.5 |
| Pan Range | 360° |
| Tilt Range | -15° to 90° |
| Minimum Illumination | Color: 0.05Lux @(F1.6, AGC ON); B/W: 0.01Lux @(F1.6, AGC ON) |
| Day/Night | IR Cut Filter |
| Network Interface | RJ45 10M/100M Ethernet |
| Protocols | HTTP, SMTP, UPnP, DNS, DDNS, NTP, RTSP, TCP, UDP, DHCP, PPPoE |
| Power Supply | DC12V |
| Operating Humidity | Less than 90% RH |
Details the operational specifications and capabilities of the dome device.
Highlights the advanced features and functionalities of the intelligent high speed dome.
Provides detailed instructions and diagrams for connecting the dome device system.
Guides on configuring communication protocols and transmission speeds for the dome device.
Covers wiring, setting communication protocol, baud rate, and device address.
Instructions for installing the camera, connecting power, and setting up the controller.
Procedures for performing functional tests and summarizing the results.
Instructions for menu operation, language, display, sector, and coordinate settings.
Settings for camera exposure, focus, zoom, and dome movement controls.
System options, communication settings, color system, and dome information.
Programming PTZ tours, vector scans, alarms, assignments, and power timers.
Managing user accounts, master setup, operator setup, authorizations, and date/time.
Table detailing short-cut operations linked to preset points.
Procedures for user login and accessing OSD menus for dome and camera.
Explanations of 'cruise track', 'Line-Scanning', and manual pan scan functions.
To Next Page