EasyManua.ls Logo

Qilive Q.6621 - Initial Start-up Procedures; Using Your Refrigerator; Refrigerating Chamber Usage

Qilive Q.6621
192 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14
EN
6. Take out the left top hinge and left top hinge cover from accessory bag; place the
door on bottom hinge, and mount left top hinge.
Connect signal line terminal
with signal line terminal , connect signal line
terminal with signal line terminal , then mount top hinge cover and hole
cover.
Hinge cover Hole cover
7. For the assembly of handle, please refer to section INSTALL THE DOOR
HANDLE.
4.5. START TO USE
Before initial start, keep the refrigerator still for more
than 2 hours before connecting it to power supply;
otherwise it will lead to a decrease in cooling capacity
or a damage to the product.
Before putting any fresh or frozen foods, the
refrigerator shall have run for 2-3 hours, or for above
4 hours in summer when the ambient temperature is
high.
Note: This product is not recommended for use with sockets or main switch with the
A/GFCI function, otherwise it may cause false tripping.
1. It will not pose a safety risk when tripped.
2. If tripping persists, it is recommended to use a socket or main switch without
A/GFCI function.
5. USE
5.1. REFRIGERATING CHAMBER
The Refrigerating Chamber is suitable for storage of a variety of fruits, vegetables,
beverages and other food consumed in the short term. Suggested storage time is
3 to 5 days.
Hot foods shall not be put into the refrigerating chamber until cooled down to room
temperature.
Foods are recommended to be sealed up before putting into the refrigerator.
The glass shelves can be adjusted up or down for a reasonable amount of storage
space and easy use.

Related product manuals