To Next Page
J
Julie RiceSep 6, 2025
What to do if Qilive Q.6641 Washer shows inverter board voltage is too high?
- GGerald BrandtSep 6, 2025
If your Qilive Washer shows an inverter board voltage that is too high, check the power system.
What to do if Qilive Q.6641 Washer shows inverter board voltage is too high?
If your Qilive Washer shows an inverter board voltage that is too high, check the power system.
What to do if Qilive Washer shows inverter board undervoltage?
If your Qilive Washer shows an inverter board undervoltage, check the power system.
What to do if Qilive Q.6641 shows inverter board overvoltage, undervoltage, or voltage is too high?
If your Qilive Washer shows an inverter board overvoltage, undervoltage, or voltage that is too high, check the power system.
What causes inverter board motor overload or motor phase loss in Qilive Q.6641?
For an inverter board motor overload or motor phase loss in your Qilive Washer, check the motor wiring, change the computer board, and check for any blockages in the system.
How to clean detergent residues from Qilive Q.6641 Washer dispenser?
If you find detergent residues in the detergent dispenser of your Qilive Washer, it's likely that the detergent is damp or clotted. Clean and wipe the detergent dispenser dry to solve this.
What to do if there is overtemperature on inverter board motor of Qilive Q.6641?
If there's overtemperature on the inverter board motor of your Qilive Washer, place the washing machine at room temperature for two hours and then enable T12 for self- calibration. If that doesn't work, change the computer board.
How to fix IPM temperature sampling error on inverter board of Qilive Q.6641?
If there's an IPM temperature sampling error on the inverter board of your Qilive Washer, consider changing the inverter motor board.
What to do if Qilive Washer shows inverter board overcurrent?
If your Qilive Washer shows an inverter board overcurrent error, consider changing the inverter motor board.
What causes water level sensor error in Qilive Washer?
If the water level sensor frequency is not within the specified range in your Qilive Washer, check the water level sensor and its wiring. Also, inspect the computer board.
What to do if the speed signal from the inverter board was lost or blocked in Qilive Washer?
If the speed signal from the inverter board of your Qilive Washer was lost or blocked, place the washing machine at room temperature for two hours and then enable T12 for self- calibration. Alternatively, change the computer board.
Essential safety guidelines for operating the appliance to prevent hazards.
Detailed electrical and physical specifications of the washing machine.
Energy test program details and efficiency ratings for the appliance.
Guidelines for selecting a suitable and safe location for the washing machine.
Steps for removing packaging, transport bolts, and preparing the machine.
Instructions for connecting water supply and drain hoses correctly.
Initial setup steps and recommended calibration for optimal performance.
Procedures before washing and guidance on detergent dispenser and types.
Identification of front view components and included accessories.
Explanation of the control panel buttons, display symbols, and functions.
Overview of programmes, load capacities, cycle times, and detailed explanations.
How to use optional functions like spin speed, delay start, and extra rinse.
Explanation of features like Remote Control, My Cycle, Auto Dose, Child Lock, and Reload.
Instructions for cleaning the cabinet, drum, and door seal for optimal performance.
Procedures for cleaning inlet filters, detergent dispenser, and drain pump filter.
Guide to identifying and resolving common error displays and operational issues.
Contact information for support and important guidelines for moving the appliance.
Important steps and precautions for moving the washing machine safely.
Steps to download the app, create an account, and connect the washing machine.
Instructions for pairing the washing machine with the mobile app and network configuration.
Completing the connection process and confirming successful network integration.
Details on product warranty terms, limitations, and claim procedures.
General
