Why is my Qilive Washer leaking water?
If your Qilive Washer is leaking water, it might be due to a loose connection between the inlet pipe or the outlet hose. Check and fasten the water pipes, and clean up the outlet hose to resolve this issue.
How to fix a Qilive Washer that won't start?
If your Qilive Washer isn't starting, the door might not be closed properly. Make sure the door is securely closed, and then restart the washer.
What to do if the Qilive Q.6829 Washer door won't open?
If the door of your Qilive Washer won't open, it could be due to the washer's safety protection design. Disconnect the power to the washer and then restart it to resolve this.
How to reduce abnormal noise from Qilive Q.6829 Washer?
To address abnormal noise coming from your Qilive Washer: 1. Check if the fixing bolts have been removed. 2. Ensure the washer is installed on a solid and level floor.
What to do if Qilive Q.6829 Washer has water overflow?
If your Qilive Washer is experiencing water overflow, try restarting the washer. This may resolve the issue.
Why is my Qilive Q.6829 Washer having water injecting problem?
If your Qilive Washer is having water injecting problem while washing, check the following: 1. Ensure that the water pressure is not too low. 2. Make sure the water pipe is straightened. 3. Verify that the inlet valve filter is not blocked.
Why is my Qilive Washer overtime water draining?
If your Qilive Washer is draining water for an extended period, check if the drain hose is blocked. Clear any blockage to resolve the issue.
To Next Page
General
