QJ5003XE-QJ6002XE
DC REGULATED POWER SUPPLY
Operating manual
1.Press the power on/off button to make power on.
2.Adjusting the voltage setting knob to the voltage which
you need (Voltage can be seen directly on the LED)
3.Adjusting the current setting knob(Using the specified screwdriver
to set security current you need.The current of
this DC regulated power
supply usually will be the maxima value in the leave-factory check
and acceptance.
4.To connect the load and press the output switch,you can see
the light of output indicator at the same time.And you can read
the value of load current on
the LED.
Specialty
1.Presetting the voltage and current
2.DC output switch
QJ3003XE-QJ3005XE
To Next Page
Need help?
General
