CONNECTING USING QUICK CONNECTION
Before initiating the connection, make sure the unit is in standby mode, with the WIFI light
flashing twice per second. If not follow the instructions for changing the connection mode.
Also ensure your phone is connected to the wifi network. (We advise turning mobile data
off during setup)
1. Open app and press “+” to
add device, or use the
add device button
2. Select the type of device as
“Air Conditioner”
3. Ensure the wifi light on the
airconditioner is fl ashing
twice per second, then press
on the orange button at
the bottom of the screen to
confi rm.
4. Enter your wifi password and
press confi rm.
5. This will then transfer the
se ttings to the air conditioner.
Wait for this to complete. If
this fails, retry. If still
unsuccessful please review
the troubleshooting section
for further help.
4
52
man_WDHx29 SCAN ('20) V2.indd 52man_WDHx29 SCAN ('20) V2.indd 52 21-12-20 15:3921-12-20 15:39
To Next Page
Loading...
Need help?
General
