AUTOMATION
Automation allows an automatic action to be set up for the device. This can be triggered by
the Time, indoor temperature, humidity of the room, weather conditions, and a range of
other influences.
1. Press on the Smart Scene tab
at the bottom of the Home
screen
2. Press on the Plus in the top
right corner to add a smart
scene.
3. Select Automation to create
a new Automation Scene
4. Setup is very similar to the
scene setup on the previous
page, and includes an extra
section for specifying a
trigger for the scene to start.
Press the Pen next to “Please
Enter Scene Name” to input
the name for your Scene
Press the Red Plus next to
“When any condition is
satisfi ed” to add the trigger
Press the Red Plus next to
“Execute following actions”
to add the action required.
Then select the air conditio-
ner from the list of devices.
5. Select the condition when
the automation should start.
A number of triggers can be
combined.
6. Chose the function, set the
value for the function, and
then press the back button
in the top right corner, to
return to the previous
screen.
7. Once all the functions
required have been added,
press the Save button in the
top rightcorner to fi nalise
and save your new scene.
The automation is now set
up, it can be turned on and
off using the toggle on the
image shown on step 2.
4
57
man_WDHx29 SCAN ('20) V2.indd 57man_WDHx29 SCAN ('20) V2.indd 57 21-12-20 15:3921-12-20 15:39
To Next Page
Loading...
Need help?
General
