C OPERATION
CONTROL PANEL
C BA
K
1. Digital display
2. Cooling
3. Air supply
4. Dry
5. Heating
6. PTC
7. Speed
8. Increase/Decrease
9. Timer
10. Speed
11. Mode
12. Power
REMOTE CONTROL
The air conditioner can be controlled with the remote control. Two AAA-batteries
are required.
NOTE: Further details of the functions can be found on the following page.
POWER
Press the POWER button to turn the
machine on or off.
MODE
Press the MODE button to switch between
cooling, heating, fan and dry modes.
FAN
Press the FAN button to change between high, medium
and low fan speeds
LED
Press the LED button to open or close the LED light on
unit, it can be a choice for sleep
condition.
p
Press the UP button to increase the
desired temperature or timer duration
q
Press the DOWN button to decrease the
desired temperature or timer duration
PTC
Press it to turn PTC on or off. When PTC turned on, the
display indicates
, lights up on remote control at the
same time; when PTC turned off,
goes out on display
and remote control at the same time. (only activated in
heating mode)
SILENT
Press it for silent mode. When silent mode turned on,
the display indicates “SL” and the lights doesn't dim
out. When silent mode turned off, the lights goes out.
In Silent mode, noise will be SILENT lower, fan works in
low speed, frequency is low.
SWING
Press to turn the swing function on and off (Can only be
activated from the remote)
TIMER Press the TIMER button to set the timer.
4
79
To Next Page
Loading...
General