CONNECTING USING QUICK CONNECTION
Before initiating the connection, make sure the unit is in standby mode, with the WIFI light
flashing twice per second. If not follow the instructions for changing the connection mode.
Also ensure your phone is connected to the wifi network. (We advise turning mobile data
off during setup)
1. Open app and press “+” to
add device, or use the
add device button
2. Select the type of device as
“Air Conditioner”
3. Ensure the wi light on the
airconditioner is ashing
twice per second, then press
on the orange button at
the bottom of the screen to
conrm.
4. Enter your wi password and
press conrm.
5. This will then transfer the
se ttings to the air conditioner.
Wait for this to complete. If
this fails, retry. If still
unsuccessful please review
the troubleshooting section
for further help.
4
85
To Next Page
Loading...